氟比洛芬酯对子痫前期患者剖宫产术后静脉自控镇痛疗效观察

目的 观察氟比洛芬酯复合丁丙诺啡和单用丁丙诺啡对子痫前期患者剖宫产术后静脉自控镇痛（PCIA）的临床效果和 应用价值。方法 选择90例ASAⅠ～Ⅱ级在腰硬联合麻醉下行子痫前期剖宫产术患者,按随机数字表法分为A组（胎儿娩出后氟比洛芬酯+术后丁丙诺啡PCIA）、B 组（术后氟比洛芬酯+丁丙诺啡PCIA）和C 组（术后丁丙诺啡PCIA）,每组30例。观察并记录患者术后1、2、4、12、24h 视觉模拟评分（VAS）、Ramassay镇静评分,平均动脉压（MAP）、心率（HR）及术后恶心、呕吐、嗜睡、皮肤瘙痒等不良反应发生情况,分别于麻醉前、术后4、12 和24h抽取静脉血,检测血清肾上腺素、去甲肾上腺素、多巴胺、血浆儿茶酚胺和内皮素的水平。结果 A 组和B组患者术后各时点VAS 评分均明显低于C组（P＜0.05）,A 组和B 组各时点Ramsay 镇静评分均明显高于C组（P＜0.05）;A 组和B 组术后各时点MAP 和HR 均明显低于C 组（P＜0.05）;术后24h 内PCIA 按压次数A 组和B 组明显低于C组（P＜0.05）;A 组和B 组术后各时点血清肾上腺素、去甲肾上腺素、多巴胺和内皮素水平均明显低于C 组（均P＜0.05）;A 组术后4h 内皮素水平明显低于B 组（P＜0.05）;A 组和B 组头晕、嗜睡、恶心、呕吐发生率均低于C 组（均P＜0.05）。结论 氟比洛芬酯能有效抑制术后应激,镇痛效果好且不良反应少,在胎儿娩出后应用氟比洛芬酯并结合术后丁丙诺啡进行PCIA更适合用于子痫前期剖宫产术后患者术后镇痛。     

LYVE-1 在甲状腺乳头状癌的表达和意义

目的 观察淋巴管透明质酸受体1（LYVE-1）的表达和癌周组织中淋巴管的生成情况在甲状腺恶性肿瘤的变化及转 移中的作用。方法 应用免疫组织化学和real-time PCR方法检测45 例甲状腺乳头状癌中央区、癌周边区和正常甲状腺组织中的LYVE-1及其mRNA 表达情况,并计算淋巴管密度（LVD）。结果 甲状腺乳头状癌周边区LVD 高于甲状腺乳头状癌中央区,而正常组织中很少见LYVE-1 阳性的微淋巴管;甲状腺乳头状癌周边区LVD 与淋巴结转移有密切关系（P＜0.05）。结论 LYVE-1是一种特异性较高的淋巴管内皮特异性标志物,对淋巴管生成促进甲状腺乳头状癌的淋巴结转移。     

Mn掺杂Zn-In-S量子点的制备及发光性质研究

制备了Mn掺杂Zn-In-S量子点并研究了Zn/In的量比和反应温度对其发光性质的影响。在Mn掺杂的Zn-In-S量子点的发光谱中观测到一个600 nm发光带。通过改变Zn/In的量比,掺杂量子点的吸收带隙可从3.76 e V(330 nm)调谐到2.82 e V(440 nm),但600 nm发光峰的波长只有略微移动。这些掺杂量子点的最长荧光寿命为2.14 ms。当反应温度从200℃增加到230℃时,掺杂量子点的发光强度增加并达到最大值;而继续升高温度至260℃时,发光强度迅速减弱。此外,测量了Mn掺杂Zn-In-S量子点的变温发光光谱。发现随着温度的升高,发光峰位发生蓝移,发光强度明显下降。分析认为,Mn掺杂Zn-In-S量子点的600 nm发光来自于Mn2+离子的4T1和6A1之间的辐射复合。     

Energy‐dependent normal and unusually large inverse chlorine kinetic isotope effects of simple chlorohydrocarbons in collision‐induced dissociation by gas chromatography‐electron ionization‐tandem mass spectrometry

Kinetic isotope effects (KIEs) occurring in mass spectrometry (MS) can provide in‐depth insights into the fragmentation behaviors of compounds of interest in MS. Yet, the fundamentals of KIEs in collision‐induced dissociation (CID) in tandem mass spectrometry (MS/MS) are unclear, and information about chlorine KIEs (Cl‐KIEs) of organochlorines in MS is particularly scarce. This study investigated the Cl‐KIEs of dichloromethane, trichloroethylene, and tetrachloroethylene during CID using gas chromatography‐electron ionization triple‐quadrupole MS/MS. Cl‐KIEs were evaluated with MS signal intensities. All the organochlorines presented large inverse Cl‐KIEs (<1, the departures of Cl‐KIEs from 1 denote the magnitudes of Cl‐KIEs), showing the largest magnitudes of 0.797, 0.910, and 0.892 at the highest collision energy (60 eV) for dichloromethane, trichloroethylene, and tetrachloroethylene, respectively. For dichloromethane, both intra‐ion and inter‐ion Cl‐KIEs were studied, within the ranges of 0.820–1.020 and 0.797–1.016, respectively, showing both normal and inverse Cl‐KIEs depending on collision energies. The observed Cl‐KIEs generally declined from large normal to extremely large inverse values with increasing collision energies from 0 to 60 eV but were inferred to be independent of MS signal intensities. The Cl‐KIEs are dominated by critical energies at low internal energies of precursor ions, resulting in normal Cl‐KIEs; while at high internal energies, the Cl‐KIEs are controlled by rotational barriers (or looseness/tightness of transition states), which lead to isotope‐competitive reactions in dechlorination and thereby inverse Cl‐KIEs. It is concluded that the Cl‐KIEs may depend on critical energies, bond strengths, available internal energies, and transition state looseness/tightness. The findings of this study yield new insights into the fundamentals of Cl‐KIEs of organochlorines during CID and may be conducive to elucidating the underlying mechanisms of KIEs in collision‐induced and photo‐induced reactions in the actual world.     

De Novo Construction of Catenanes with Dissymmetric Cages by Space‐Discriminative Post‐Assembly Modification

Considerable efforts have been made to increase the topological complexity of mechanically interlocked molecules over the years. Three‐dimensional catenated structures composed of two or several (usually symmetrical) cages are one representative example. However, owing to the lack of an efficient universal synthetic strategy, interlocked structures made up of dissymmetric cages are relatively rare. Since the space volume of the inner cavity of an interlocked structure is smaller than that outside it, we developed a novel synthetic approach with the voluminous reductant NaBH(OAc)₃ that discriminates this space difference, and therefore selectively reduces the outer surface of a catenated dimer composed of two symmetric cages, thus yielding the corresponding catenane with dissymmetric cages. Insight into the template effect that facilitates the catenation of cages was provided by computational and experimental techniques.     

Constructing Charge‐Transfer Excited States Based on Frontier Molecular Orbital Engineering: Narrowband Green Electroluminescence with High Color Purity and Efficiency

The design and synthesis of organic materials with a narrow emission band in the longer wavelength region beyond 510 nm remain a great challenge. For constructing narrowband green emitters, we propose a unique molecular design strategy based on frontier molecular orbital engineering (FMOE), which can integrate the advantages of a twisted donor–acceptor (D‐A) structure and a multiple resonance (MR) delayed fluorescence skeleton. Attaching an auxiliary donor to a MR skeleton leads to a novel molecule with twisted D‐A and MR structure characteristics. Importantly, a remarkable red‐shift of the emission maximum and a narrowband spectrum are achieved simultaneously. The target molecule has been employed as an emitter to fabricate green organic light‐emitting diodes (OLEDs) with Commission Internationale de L'Eclairage (CIE) coordinates of (0.23, 0.69) and a maximum external quantum efficiency (EQE) of 27.0 %.     

Determining multi‐pesticide residues in teas by dispersive solid‐phase extraction combined with speed‐regulated directly suspended droplet microextraction followed by gas chromatography–tandem mass spectrometry

In this study, an effective speed‐regulated directly suspended droplet microextraction method was developed to condense pesticide residues from teas through dispersive solid‐phase extraction prior to analysis by gas chromatography with tandem mass spectrometry. The extractant was intentionally dispersed into the sample solution in the form of globules through high‐speed agitation. This procedure increases the contact area between the binary phases and shortens the distribution equilibrium time. The fine globules reassembled by decelerating stirring speed, the extractant could be taken out for gas chromatography with tandem mass spectrometry. Recovery studies were performed under optimized extraction conditions by using matrix blanks fortified with pesticides at three concentrations (10, 50, and 100 µg/kg). Over 87% of the recoveries for the analytes in four tea matrices were acceptable given their recovery ranges of 70–120% and relative standard deviations of ≤20%. The limits of quantification of most pesticides were lower than 10 µg/kg and thus satisfied the requirements for maximum residue levels prescribed by the European Community. A total of 38 tea samples from local markets were analyzed by using the proposed method. Results showed that chlorpyrifos was the most frequently detected pesticide in teas. The method is a potential choice for the routine monitoring of pesticide residues in complex matrices.     

C.I.颜料红177中间体的制备工艺改进

本文较为系统地研究了铜粉催化剂加入方式对C.I.颜料红177中间体4,4'-二氨基-1,1'-二蒽醌-3,3'-二磺酸(DAS)合成过程中的乌尔曼偶联反应速率的影响规律。 研究结果表明,在55 ℃较佳反应温度下,先加入与溴氨酸钠质量比为2:5的铜粉,反应一段时间后再加入与溴氨酸钠的质量比为1:5的铜粉,与一次性加入与溴氨酸钠的质量比为3:5的铜粉相比较,综合反应时间可节省2~3 h。 另外,对于DAS中混有的铜盐,采取在制备过程中加入柠檬酸的方法予以去除,此举可提高DAS的纯度。 当铜粉与柠檬酸的质量比为6:1时,可使DAS中铜盐的含量小于0.001%。 此外还探究了蒸馏后滤液的剩余量对DAS收率的影响,结果表明,滤液的剩余量在20 mL时,DAS的收率在95%以上。 基于本文的研究结果提出,欲进一步提高该反应的收率,需要寻找更高效的催化剂。     

基于手机光线传感器为检测器的简易光度计的自组装设计

By using light sensors of the cellphone, we build a simple photometer which can be used in quantitative analysis experiments. We have performed 5 replicate measurements of iron with phenanthroline to verify reproducibility and stability. We find the absorbance of the sample has a good linear relationship with the concentrations of iron with a R² value around 0.999 and the RSD of 2.81%. The result is 4.94 μg·mL^-1 with spectrophotometer and 5.11 μg·mL^-1 with our photometer. The photometer is simple, convenient, accurate and realistic by using a phone as detector, which can replace the traditional spectrophotometer in the laboratory class. The students can enhance their understanding of the structure and principle of spectrophotometer by the DIY photometer experiment.